Shenzhen Factory Professional Hardware Manufacturer Custom PC Aluminium Network Computer Cases 1U Rackmount Server Chassis
Custom PC Aluminium Network Computer Cases, 1U Rackmount Server Chassis is the one-stop solution for OEM/ODM projects that demand light weight, high strength and rock-solid EMC performance in only 44.45 mm of rack height. Located in Shenzhen’s high-tech corridor, our 18 000 m² facility houses a complete vertical chain: 6 kW fiber-laser cutting, CNC punching, 300 t press brakes, 5-axis aluminum milling, robotic MIG/TIG welding, brush-finishing, silk-screen and Class-8 clean-room assembly. Every chassis starts with 1.5 mm 5052-H32 aluminum sheet selected for its 33 % weight saving versus steel and superior thermal conductivity of 138 W m⁻¹ K⁻¹, critical for passively cooled network appliances.
After laser blanking, sides are formed in a single hit on a CNC press brake with 0.1° crowning to guarantee ≤0.2 mm twist across 19″ ears—vital for slide-rail compatibility in vibration-rich telecom huts. Extruded 6063-T5 heat-sink rails are friction-stir welded along the top plane, creating an integral 20 mm fin array that adds 30 % surface area without external heatsinks, lowering CPU delta-T by 6 °C in 35 °C ambient. All edges are deburred and poly-bead blasted to a uniform Ra 0.8 µm, then clear-anodized to 15 µm for 500 h salt-spray resistance and a fingerprint-resistant matte silver finish; black or custom RAL hard-coat options are available for an additional 200 h protection.
Inside, the mono-block frame accepts full-size ATX, Micro-ATX or proprietary 13″ × 10″ motherboards on a removable 2 mm tray fitted with PEM floating clinch nuts, allowing field replacement in under 60 seconds. Drive capacity scales from two hot-swap 3.5″ bays to six tool-less 2.5″ NVMe carriers molded from conductive PPE that suppress 25 dB of radiated emissions at 2.4 GHz. Front and rear bulkheads are CNC-milled from 3 mm plate and can be supplied blank, with pre-punched VGA/USB cut-outs, or populated with your choice of LC fiber, RJ-45, or M12 X-coded feed-throughs—each panel gasketed with 0.5 mm conductive silicone to maintain IP40 sealing.
Electromagnetic compatibility is engineered-in: continuous 6 mm beryllium-copper finger stock along the lid seam plus stainless mesh backing on 66 % open-area ventilation slots yields 40 dB shielding effectiveness from 30 MHz to 1 GHz, meeting CE/FCC Class A without costly secondary shields. A 25 × 25 mm copper ground bar is riveted to the floor and tied to a M4 stud rated for 30 A surge, satisfying GR-1089-CORE and IEC 62368-1 requirements.
Thermal options range from passive convection to active 40 mm dual-counter-rotating fans (10.2 CFM each) mounted on silicone grommets that cut transmitted vibration by 18 dB. A snap-in duct can be rotated 180° to support front-to-rear or reversed airflow, making the chassis equally at home in broadcast OB-vans or data-center cold aisles. Shock resistance is validated on a 3-axis vibration table to MIL-STD-810G 514.6 Cat 4, ensuring survival in rolling stock or shipboard racks.
Design turnaround is measured in hours, not weeks. Upload a STEP file Monday morning and receive a DFM report plus CNC-milled prototype Tuesday evening; production lots from 50 to 50 000 units ship in 10–12 days with laser-etched serial numbers, barcode labels and your logo silk-screened in UV-stable black. All processes are ISO 9001:2015 and IATF 16949 aligned; PPAP Level 3, RoHS/REACH and conflict-mineral documentation ship with every pallet. Whether you need a shallow 250 mm-deep firewall appliance or a 650 mm-deep GPU-edge server, our Shenzhen-made Custom PC Aluminium 1U Rackmount Chassis delivers telco-grade ruggedness, thermal headroom and aesthetic finesse—so your next network computer slides into the rack, powers up, and disappears from sight while outperforming boxes twice the height.
Product Tags:
|
|
Customized 1U Rackmount NAS Chassis with 5052-H32 Aluminum and 6063-T5 Heat-Sink Rails for IP40 Sealing Images
|
